Alyson Shotz
Rim of the Hour, 2022
weld printed steel, paint
60 x 42 x 40 inches
152.4 x 106.7 x 101.6 cm
152.4 x 106.7 x 101.6 cm
Edition 1 of 3 (+ 1 AP)
Copyright The Artist
Further images
ALYSON SHOTZ STUDIO Instructions for hanging Rim of the Hour: Tools needed: Cable crimper, wire cutter, eye bolt, anchor,drill 1. Handle with Gloves! Oil from hands will corrode paint over...
ALYSON SHOTZ STUDIO
Instructions for hanging Rim of the Hour:
Tools needed:
Cable crimper, wire cutter, eye bolt, anchor,drill
1. Handle with Gloves! Oil from hands will corrode paint over time
2. At desired location, attach an eye bolt into the ceiling either into a wood beam or steel beam. If that is not possible, put an anchor in the ceiling, and then the eye bolt. The sculpture weighs about 30 lbs.
3. The cable is already attached to the sculpture. Loop that through the eye bolt, trim it to the height you want, and secure it with a crimp - included in zip lock bag. You will need a cable crimper for this.
4. At the sculpture end, the cable is secured with a set screw. If you need to tighten, use enclosed hex key and tighten to the right
Any questions please call studio at 718-237-4928
Instructions for hanging Rim of the Hour:
Tools needed:
Cable crimper, wire cutter, eye bolt, anchor,drill
1. Handle with Gloves! Oil from hands will corrode paint over time
2. At desired location, attach an eye bolt into the ceiling either into a wood beam or steel beam. If that is not possible, put an anchor in the ceiling, and then the eye bolt. The sculpture weighs about 30 lbs.
3. The cable is already attached to the sculpture. Loop that through the eye bolt, trim it to the height you want, and secure it with a crimp - included in zip lock bag. You will need a cable crimper for this.
4. At the sculpture end, the cable is secured with a set screw. If you need to tighten, use enclosed hex key and tighten to the right
Any questions please call studio at 718-237-4928